USED Jimmy Wallace Guitars / Double-Barrel Black Sparkle [12]

The rugged sound produced by the retro look is appealing!
This guitar brand is made by Jimmy Wallace, a well-known guitarist, guitar collector, and organizer of the largest guitar trade show in the United States.
The basswood body is finished in black sparkle with fabric reminiscent of Dan Electro applied to the sides of the body.
The original 50s Double Bridge pickups are mounted directly on the body for a crisp, straight sound.
The neck grip is fat, but the fingerboard is 9.5" radius with a modern spec, so it is easy to play chords and does not lose its tone when choking.
The sound and playing comfort are as wild as its wild appearance.

There are weather checks on the paint, stains on the parts, rust and tarnish on the metal parts, and peeling of the fabric on the body side due to the relic process.
The dents near the strap pin on the neck side and the paint peeling off the end of the body back seem to be damage caused by use.
The guitar has been maintained and cleaned at our repair center and is in good playability condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 62534
Year of manufacture: 2020
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, Spec Sheet
Weight: 3.04kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Depth: No problem, sufficient fret height.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.4mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
62534

Year of manufacture
2020

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Certificate, Spec Sheet

Weight
3.04kg

Truss Rod
No problem, rod checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.4mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment