USED Fender USA / American Standard Telecaster Black [12]

The "American Standard Telecaster", a representative model of Fender Telecaster, is now in stock in used condition.
Alder body with one-piece maple neck.
The fingerboard has 22 frets and is fluted, making it suitable for a wide range of genres.
The joint plate is engraved to celebrate the 60th anniversary of the Telecaster.
Overall, there are scratches, dings, and some cracks on the pickguard.
The control knob has been replaced with a rounded dome type.

The fretboard surface has been refretted and re-nutted in the past, so the fretboard surface has been refinished once.
There are no negative aspects, and the replacement has been done beautifully, so you can play it with confidence in the future.
* Original frets and nut are included.

Some electrical parts have also been replaced. The rear pickup has been replaced with a Gotoh/TL-Classic, and the condenser has been replaced with an orange drop.
This makes it possible to enjoy a more traditional Telecaster sound with higher playability than a typical Amesta.

The guitar has been set up by us after arrival, so you can play it with no worries.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: US11292159
Year of manufacture: 2011
Country of manufacture: USA
Case: Original hard case
Weight: 3.47kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 22.5mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and groove adjustment, neck joint screw x1 installed

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
US11292159

Year of manufacture
2011

Country of manufacture
United States of America

Case
Genuine hard case

Weight
3.47kg

Truss Rod
No problem, confirmed to 60 degrees to the left and right of the rod

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
22.5mm

Scale
648mm (25.5")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, installation of 1 neck joint screw