USED PEAVEY / Wolfgang USA Ivory [12]

PEAVEY's Eddie Van Halen signature model, made in USA, is now in stock.
After MUSICMAN, the Van Halen model was produced by PEAVEY, a global musical instrument and audio equipment manufacturer, and features looks and specs inherited from later EVH brand guitars.

Compact headstock with 3:3 peg layout, asymmetrical shape and comfortable grip, bird's eye maple neck/fingerboard with 22 frets.

The basswood body has a flat, no-nonsense sound quality and is equipped with the original 2 humbucker pickups, and the FRT-licensed locking tremolo has D-tuners as standard.

The toggle switch pickup selector is set with the rear pickup on the upper side and the front pickup on the lower side to prevent malfunction when tapping, another Van Halen-oriented specification.

There is a large paint peel on the edge of the first string side of the body back and a small paint crack on the neck joint.
There are some minor scratches and dents scattered throughout, and the metal parts are dull.
The truss rod has little room to tighten and the neck is slightly twisted, but there are no problems with playing the instrument as it is now.
The peg buttons have deteriorated, so they have been replaced with Schaller pearloid buttons.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 91001119
Country of manufacture: U.S.A.
Case: Original hard case
Accessories: Black arm
Weight: 3.39kg
Truss Rod: No problem, rod is 60 degrees to the left and right (not much left)
Fret Height: No problem, fret height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.5mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 23.2mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
91001119

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Arm (black)

Weight
3.39kg

Truss Rod
No problem (not much left), confirmed up to 60 degrees to the left and right

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.5mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
23.2mm

Scale
648mm (25.5")

RADIUS
406mm (16")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, electrical repair