USED Gibson USA / Flying V 67 Rei 1H MOD Mirror Pick Guard Ebony [12]

Flying V, featuring modifications reminiscent of PS, the guitar and vocals of one of America's leading hard rock bands, is now in stock!
Based on a 1999 Flying V 67 Reissue, this model has been modified to 1 humbucker, 1 volume, 1 tone, and the truss rod cover and pickguard have been replaced with a mirror (the original truss rod cover with Gibson logo is included).
The pickups are believed to be original 500T, as they are stamped Gibson USA.

The paint is peeling on both body tips, and there are numerous scratches and dings scattered throughout.
The end strap pins have been relocated to the center of the body end.
Although there are many modifications and signs of use, each part has been maintained and cleaned at our repair center, and playability is good.
The bottom metal fittings of the attached hard case are broken, but it does not affect the storage and transportation.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 91939765
Year of manufacture: 1999
Country of manufacture: USA
Case: Original hard case
Accessories: truss rod cover (genuine)
Weight: 3.08kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.8mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (wiring repair)

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
91939765

Year of manufacture
1999

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Truss rod cover (genuine)

Weight
3.08kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
41.8mm

Neck thickness near 1st fret
20.9mm

Neck thickness near 12th fret
22.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair (wiring repair)