USED Fender Custom Shop / 1960 Stratocaster Relic MOD 2018 Aged Fiesta Red [12]

We are pleased to announce the arrival of a Custom Shop 1960 Strat with a realistic relic finish that gives it a vintage feel!
It was made in 2018 to early 1960s specifications and is finished in the custom 60s-inspired Festa Red color.

It has an alder body, maple neck, and slabboard rosewood fingerboard with 7.25" fingerboard radius and vintage-type frets, reproducing not only the looks but also the vintage-like playing comfort.

The pickups are genuine Handwired 60/63 STRATs, but they have been replaced with what appears to be a Custom Shop Fat 50s Set, and the pickup covers and pole pieces have not been reliced.
The sound has a fat tone with more attack than the original.
There are scratches, dents, weather checks, and peeling paint all over the guitar, but the red pen mark on the elbow contour where the paint is peeling seems to have been written later.
The playability is good as each part has been maintained and cleaned at our repair center.
The back panel is missing and the hard case is faded.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: CZ527860
Year of manufacture: 2018
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate, Spec Sheet, Arm, Bridge Cover
Weight: 3.55kg
Truss Rod: No problem, rod is confirmed to be 60 degrees to the left and right.
Fretboard: No problem, sufficient fretboard height
String height on bass string: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.2mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
CZ527860

Year of manufacture
2018

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Certificate, Spec Sheet, Arm, Bridge Cover

Weight
3.55kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Leftover frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.2mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment