USED PEAVEY / Cropper Classic Amber [12]

Steve Cropper Model is now in stock.
This is a signature model of Steve Cropper, a well-known American R&B and blues guitarist.
The TL shape body with figured maple top and mahogany back features contours around the top and back of the body.

The unique neck joint shape, named Maxcess neck joint, provides very smooth access to the high frets.

The very thin neck shape, 12" fingerboard radius and jumbo frets provide smooth fingering and are very easy to play.

The front pickup was disconnected and has been replaced with a twin-blade pickup of the same type (made by DiMaggio, model number unknown).
The rear pickups are two original Db4 Quad Blade Humbucking and can be switched between dual/single by a mini-switch.
There are bubbles throughout the paint on the body back and a large paint peel near the end.
There is a large paint crack at the neck joint on the 6th string side, and there are many scratches and dents scattered throughout the instrument.
The rubber grip wrapped around the top of the control knob is missing.
The neck is a little wavy, and there is a lot of fret wear, but there are no problems with playability.
The guitar has been maintained and cleaned at our repair center.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: 08644082
Country of manufacture: USA
Case: Hard Case
Weight: 3.52kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right (wavy)
Fret Remaining: Need to consider replacing the frets next time it is repaired.
String height on bass side: 23.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.4mm
Neck thickness near 1st fret: 19.4mm
Neck thickness near 12th fret: 20.6mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, neck ironing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
08644082

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.52kg

Truss Rod
No problem when rod is checked up to 60 degrees to the left and right (wavy)

Fret remainder
Need to consider re-fretting for next repair

String height on bass string side
23.0mm above the 12th fret

High string side
1.5mm above the 12th fret

Nut width
43.4mm

Neck thickness near 1st fret
19.4mm

Neck thickness near 12th fret
20.6mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, neck ironing