USED Fender USA / American Vintage 52 Telecaster 1996 Butter Scotch Blonde [12]

Still highly popular American Vintage Series 52 Telecaster is now in stock.
This model faithfully reproduces the specifications of the early 50's with a center bookmatched ash body, 1-ply black guard, one-piece maple neck with spaghetti logo, triple brass bridge saddle, and all screws are flat head screws.
This model is the origin of the Telecaster, which continues to this day.

This model has the original wiring from 52, and the 3-way pickup selector is set from the bridge side, rear/front/front tone zero, and the neck side position produces a very muddy sound.
The topcoat on the body has been sanded off to a matte finish, and there are large paint peels on the end and 6th string side of the body top.
There is some paint reaction and peeling at the base of the neck, possibly from a guitar hanger, and some paint peeling at the tip of the head top and the end of the first string side of the head back.
The guitar has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 21779
Year of manufacture: 1996
Country of manufacture: USA
Case: Original hard case
Weight: 3.46kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 22.4mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
21779

Year of manufacture
1996

Country of manufacture
U.S.A.

Case
Genuine hard case

Weight
3.46kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
22.4mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment