USED Gibson USA / Flying V 67 Reissue Ebony Fingerboard 2000 Classic White [12]

Flying V with ebony fretboard is now in stock.
This reissue model reproduces the features of the 1967 Flying V and was made in 2000.
Normally, rosewood fretboard is used, but only the classic white color has ebony fretboard in this period because of the noticeable paint transfer on the conduit at the end of the fretboard.

Despite its radical shape, the Flying V is lightweight, easy to handle, and playable at high frets, and the rich mahogany sound has made it a favorite of many famous guitarists around the world.

Both front and rear pickups have been replaced with Gibson pickups. The front pickups are 496R, and the rear pickups have Gibson engraving but the model number is unknown.
The pots have also been replaced, the tone is made in Japan, and the manufacturer of the two volumes is unknown.

The 6-string pegs have been replaced, and the buttons are a different shade from the other pegs.
(The original pegs are included, but they are difficult to work.)
There is a weather check on the head back and a small paint chip on the head side of the first string side.
There is a paint crack from the head side to the neck side on both strings, but it does not affect the performance or use.
There are several rice-sized dents and paint chips on the body side of the 6th string.
The body also has some weather checks, scratches, and dings, and the topcoat has turned yellow with age.
The topcoat has yellowed with age. Although there are some parts that have been replaced and there are signs of use, each part has been maintained and cleaned at our repair center, and the playability is good.
The bottom clasp of the hard case is broken.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: 00110752
Year of manufacture: 2000
Country of manufacture: USA
Case: Original hard case
Accessories: Original 6-string pegs (with some damage)
Weight: 3.34kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.3mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
00110752

Year of manufacture
2000

Country of manufacture
United States of America

Case
Genuine hard case

Accessories
Original 6-string pegs (with some difficulties)

Weight
3.34kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
20.5mm

Neck thickness near 12th fret
22.3mm

Scale
628mm (24.75")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair