USED Rickenbacker / 1963 615 Fireglo [12]

Miraculous arrival of a 615 made in 1963!
This model was manufactured from 1962 to 1977, and is determined to be made in 1963 based on the serial number, and is equipped with a dual pickguard that was adopted from the late 1963.

The combination of the solid body construction with no body cavities and the toaster top pickups produces a very sharp and crisp sound compared to the 300 series, which is not only resistant to feedback, but also very good with distortion effectors, making it a great all-around performer.

It has a simplified look of the current "620" with dot position marks and non-binding neck and body.

The original roller bridge is equipped with an accent vibrato, and tremolo playing is also possible.
There are many paint chips, scratches, and dents scattered from the tip of the neck to the body end, and the hardware is dull.
There is a hole left by a strap pin on the heel of the neck.
We have scraped the wood around the truss rod cap and checked the rod condition, but there is not much left in the direction of tightening.
The neck and frets are in good condition and the guitar is in player condition, although it has a strong sense of use due to the vintage nature of the guitar.
The bridge cover is missing.
Item Rank: B: Fairly scratched & used, but no problems in normal use.

Serial Number: CE9013
Year of manufacture: 1963
Country of manufacture: USA
Case: Hard Case
Weight: 3.32kg
Truss Rod: Noted, rod is checked to 60 degrees to the left and right, no problem (not much left).
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 19.3mm
Neck thickness near 12th fret: 21.5mm
SCALE: 628mm (24.75")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to be seen in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
CE9013

Year of manufacture
1963

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.32kg

Truss Rod
No problem (not much left), as confirmed up to 60 degrees to the left and right of the rod with caution

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.8mm

Neck thickness near 1st fret
19.3mm

Neck thickness near 12th fret
21.5mm

Scale
628mm (24.75")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment