USED Aria Pro II / ST-400 1979 Natural [12]

ST model manufactured by Matsumoku is now in stock.
This ST model by Aria Pro II, a long-established Japanese brand, was manufactured by Matsumoku, which was involved in OEM production for various Japanese musical instrument makers from the 1960s to 1987, in 1979.

It is a copy of the ST model from the late 70's as well as the production period of this unit. It has a large head, bullet nut, Sen body with ash-like characteristics, one-piece maple neck with 21 frets, and die-cast bridge saddle.
The original 5-way lever switch has been replaced with a 3-way.

The original 5-way lever switch has been replaced with a 3-way switch.

There is a large dent on the end of the body, many scratches and dents scattered throughout the body, and metal parts are dulled, showing signs of age.
It has been maintained and cleaned at our repair center, including pot replacement, and is in good playability condition.
The arm and back panel are missing.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: C790111
Year of manufacture: 1979
Country of manufacture: Japan
Case: Non-authentic soft case
Weight: 3.58kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 40.8mm
Neck thickness near 1st fret: 22.0mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (control cleaning, pot replacement x 2)

* There are some scratches, dents, etc. that are difficult to see in the pictures or are not shown in the description. Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial number
C790111

Year of manufacture
1979

Country of manufacture
Japan

Case
Non-genuine soft case

Weight
3.58kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
40.8mm

Neck thickness near 1st fret
22.0mm

Neck thickness near 12th fret
24.6mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair (control cleaning, pot replacement x 2)