USED Fender Japan Fender Japan / ST57-TX RE/F-TECH Modified Candy Apple Red [20]

The serial number suggests that it was made in 1989-1990, but we have determined that it was made in 1990 based on the date stamp on the neck end.
There is a sticker "RE/F-TECH Modified" on the head (private workshop).
The P.U. has been replaced with a Texas Special, the capacitor has been replaced, the controls have been changed to Master Volume and Master Tone, and the center tone pot has been changed to a volume that can add a front at the rear or rear + center position. The center tone pot is rear, and the volume is rear + center position to add front.

* It is in good playing condition as it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, grated, and electrical repairs have been done since we received it.

The back panel is missing.
There are several small dents with paint cracks on the top of the body.
There are dents with paint cracks on the back horns of the body.
Other parts have some rust and scratches, and there are some minor dings and dents.
The case included is the current Fender case.

Item rank: B+ (Good)

Year of manufacture: 1990
Truss rod: There is enough room.
Fretboard: 60-70%.
Accessories ： Gig bag / Non genuine arm
Country of Origin ： Japan
Weight ： 3.60kg
Serial ： MIJ I034175

Truss Rod : No problem.
Fretboard: Still good for cutting, but the frets are low.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|21.2mm
Neck thickness (near 12th fret)|24.3mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
42.0mm

Neck Thickness (near 1st fret)
21.2mm

Neck Thickness (near 12th fret)
24.3mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair