USED edwards / E-AMAZE-AS-5 Solid Burner / Maple Fingerboard [12]

J-style bass that matches the physique of the Japanese.
Based on the ESP AMAZE, this model is easier to handle and more affordable.

The ash body is burnered to accentuate the annual rings, giving it a unique texture.

Lightweight HIPSHOT tuners are used for the pegs to prevent the head from falling off, and a newly designed 17mm thick head for the 5th string gives a rich low-B sound.
In addition, the dropped peg nuts ensure sufficient tension.

The bridge can be back-threaded or top-loaded, and the tension can be adjusted for all strings or each string as desired.

ESP Custom Lab's E-AMAZE pickups are mounted, with the polepiece height optimized for the output balance of each string, and the top of the polepiece chamfered to capture the string vibrations correctly.
In addition, the split-coil construction, in addition to thorough noise reduction measures, results in surprisingly low noise.

The master volume can be pushed/pulled to switch between active and passive modes, and the tone knob can be pushed/pulled to switch between 0.022μF and 0.047μF capacitors.
It is in good condition with only minor scuffs and scratches and little signs of use.
Playability is also good as each part has been maintained and cleaned at our repair center.
Product Rank: B+: Some scratches, but no problem in normal use.

Serial Number: ED0312243
Year of manufacture: 2024
Case: Original soft case
Includes: wrench
Weight: 4.34kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.7mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 45.8mm
Neck thickness near 1st fret: 20.2mm
Neck thickness near 12th fret: 24.3mm
SCALE: 864mm (34")
RADIUS: 305mm (12")
Strings in setup: D'Addario EXL165 +XLB130T/ .045-.130 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
ED0312243

Year of manufacture
2024

Case
Genuine soft case

Accessories
Wrench

Weight
4.34kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.7mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
45.8mm

Neck thickness near 1st fret
20.2mm

Neck thickness near 12th fret
24.3mm

Scale
864mm (34")

RADIUS
305mm (12")

Strings for setup
D'Addario EXL165 +XLB130T/ .045-.130 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment