USED Ibanez / RG680CM Deep Red [12]

Made in Japan of the signature model RG with curly maple laminate on the body top.
This model was manufactured and released only in Japan for two years from 1998 to 2000, and was made by Fujigen, one of the best guitar factories in Japan.

The basswood body is laminated with beautiful curly maple on the top, giving it a look reminiscent of the flagship j-custom series.

The pickups are IBZ QM1/QMS1/QM2 which have high power, rich overtones, and faithfully reproduces the dynamics of picking, and are equipped with the original wiring.

An arming adjuster has been added to prevent tuning deviations and instability when choking or breaking strings.
There are numerous dents and paint chips scattered around the outer perimeter of the body, in addition to the outer end of the 6th string side horn and the tip of the 1st string side horn on the body top and the outer end of the 6th string side horn and the area around the 1st string side horn on the body back.
There is also deep wood shaving near the neck joint.
There are also minor scratches and dings throughout, and the hardware is dull.
The back panel is missing and there are some signs of use, but the instrument has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: F0001341
Year of manufacture: 2000
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.34kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 17.9mm
Neck thickness near 12th fret: 21.2mm
SCALE: 648mm (25.5")
RADIUS: 432mm (17")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number F0001341

Year of manufacture: 2000

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm

Weight3.34kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret remainder no problem, enough fret height is available

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.2mm

Neck thickness near the 1st fret 17.9mm

Neck thickness near 12th fret: 21.2mm

SCALE 648mm (25.5")

RADIUS 432mm (17")

Strings D'Addario EXL110 / .010-.046 set at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair