USED Kurosawa Instrument / "Ryujin" Ryujin Standard [12]

A miraculous arrival of a phantom aluminum guitar "Ryujin -Ryujin-"!
This is an original guitar that Kurosawa Gakki manufactured and released in the mid-1990s.
The Standard model has the same body and neck structure as the Custom model, but the body is not decorated and the fingerboard inlay is only "Raijin" while the Custom has "Fujin" and "Raijin". The body and neck construction are the same as the Custom, but the body is not decorated.

The machined aluminum body is equipped with an original single-coil pickup, using a magnet with about 40 times the magnetic force of an alnico pickup, and the pickup bobbin and aluminum cover are tightly sealed to achieve a low noise level comparable to an active pickup.

The slim C-shape maple neck and ebony fingerboard with 24 frets, coupled with the small body, make it easy to handle and play.

This is a very rare model that can only be found in used condition, so it is a must-have addition to your collection.
There are some paint chips on the top of the head, some minor scratches and dings, and the hardware is dull.
The neck is a little wavy, but there is no problem with playability as it is now due to fret rubbing.
The neck is slightly wavy, but due to fret rubbing, it does not interfere with playability in its current state.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 026022
Year of manufacture: 1990-
Country of manufacture: Japan
Case: Hard Case
Weight: 4.28kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.9mm
Neck thickness near 1st fret: 20.8mm
Neck thickness near 12th fret: 22.5mm
SCALE: 628mm (24.75")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, electrical repair

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
026022

Year of manufacture
1990- (the year of manufacture)

Country of manufacture
Japan

Case
Hard case

Weight
4.28kg

Truss Rod
No problem (slight waviness)

Remaining frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.9mm

Neck thickness near 1st fret
20.8mm

Neck thickness near 12th fret
22.5mm

Scale
628mm (24.75")

RADIUS
241mm (9.5")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair