USED Fender USA / American Vintage 62 Jaguar 1999 3-Color Sunburst [12]

We are pleased to announce the arrival of a 1999 American Vintage 62 Jaguar!
The unique sound produced by the short scale, unique floating bridge, single-coil pickups with metal yokes, and special controls, etc., was highly appreciated by guitarists in the 60's in the Saab music scene and in the 90's in the alternative grunge scene. The unique sound produced by the short scale, unique floating bridge, single-coil pickup with metal yoke, and special controls was highly appreciated by the guitarists of Saab music in the 60's and Alterna Grunge in the 90's. Even today, it is one of Fender's representative models and is available in various grades.

The bridge saddle has been replaced with a mustang saddle, and a buzz stop bar has been installed to prevent the strings from falling off even with hard strokes and cutting in shoegaze and grunge styles.
There are many fine weather checks from the entire head to the neck, and the head is scattered with large and small dents.
There are numerous paint reactions from the guitar stand on the end of the body, buckle scratches and paint chips on the body back, and paint chips on the sides of the body.
There is paint peeling under the preset switch plate, and there are some minor scratches and dings scattered throughout the instrument.
Some parts have been replaced and there are some signs of use, but the instrument has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial Number: V120077
Year of manufacture: 1999
Country of manufacture: USA
Case: Original hard case
Accessories: Arm
Weight: 3.91kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.0mm
Neck thickness near 12th fret: 23.0mm
SCALE: 610mm (24")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
V120077

Year of manufacture
1999

Country of manufacture
U.S.A.

Case
Genuine hard case

Accessories
Arm

Weight
3.91kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.0mm

Neck thickness near 12th fret
23.0mm

Scale
610mm (24")

RADIUS
184mm (7.25")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing