USED Tokai / ST60 1981 Metallic Red [12]

Japan Vintage, 1981 Tokai ST-60 is in stock.
ST'64 ORIGINAL MODEL OLDIES series, which aims to be a perfect replica of the old Strat.

Alder body with hard maple neck/rosewood fretboard with 21 frets, round fingerboard with pearloid dot position marks as in '64 spec.

Bush type pegs with gear covers with lines are installed as in the vintage model. The shape of the drop from the neck to the head and the angle to the string post have been studied to reproduce the vintage playing comfort.

Three ST-Vintage pickups with U-stamped gray bobbins were developed with vintage tones in mind.
The discoloration of the pickup covers due to aging has also been reproduced.

This is a great opportunity to try Tokai's ST model, which is highly regarded as a vintage replica both in Japan and overseas.
There are some scratches, dents, and paint chips scattered throughout, and the hardware is dull.
The frets are low, but there are no problems with playability.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial number: 1023341
Year of manufacture: 1981
Country of manufacture: Japan
Case: Non-authentic soft case
Accessories: Arm
Weight: 3.39kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees left and right.
Fretboard: Still good for cutting, but low frets.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 21.9mm
Neck thickness near 12th fret: 22.8mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 1023341

Year of manufacture 1981

Country of manufacture Japan

CaseNon-genuine soft case

AccessoriesArm

Weight3.39kg

Truss RodNo problems, rod has been checked up to 60 degrees to the left and right.

Fret remainder can still withstand cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near the 1st fret 21.9mm

Neck thickness 22.8mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair