USED Fender / Heritage 60s Stratocaster 3-Color Sunburst [12]

A new series that pursues the supreme playing experience for players.
Made in Japan Heritage is a series that pursues the supreme playing experience that vintage instruments offer to players.

The Heritage series is packed with specifications that will appeal to vintage fans, and was developed under the supervision of Mark Kendrick, a master builder at the Fender Custom Shop who has an in-depth knowledge of vintage instruments.

All models in the Heritage Series are designed based on profiling data of USA products, and the body and neck shapes are also adapted to the age of the instrument.

Every detail, from the crosswire pickups and pickup settings and tones to the reproduction of body colors, is in the authentic Fender lineage.

Alder body with lacquer finish that will deepen in color with age, 7.25" radius Thick "C" shape maple neck with 21 vintage-style frets, 6-saddle style Vintage-style Synchronized Tremolo bridge, and pickups specially selected for the Heritage Series, all of which have been carefully selected to deliver classic playability and sweet vintage tones. The "Heritage Series" is the first of its kind in the world.

The Heritage series offers the one-of-a-kind playability and tasteful tone that has made Fender a favorite of many great musicians.
There are some minor scratches and dings scattered throughout, and the hardware is slightly dull.
Although it has some signs of use, it has been maintained and cleaned at our repair center and is in good playability condition.
It comes with a genuine gig case, but one shoulder is missing and there is a tear on the other side.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: JD20014347
Year of manufacture: 2020
Country of manufacture: Japan
Case: Original gig case
Accessories: Arm
Weight: 3.42kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.3mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 25.2mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number JD20014347

Year of manufacture 2020

Country of manufacture Japan

CaseGenuine gig case

AccessoriesArm

Weight3.42kg

No truss rod problemNo truss rod problem.

Fret RemainingNo problem, fret height is sufficient.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.3mm

Neck thickness near the 1st fret: 21.5mm

Neck thickness 25.2mm near 12th fret

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment