USED FERNANDES / TE-95HT / HOTEI Model Late model Black/Whiteline [12]

Tomoyasu Hotei signature model is now in stock.
This is a later version of the TE-95HT signature model with the iconic geometric pattern of Torayasu Hotei.

Basswood body, maple neck and rosewood fingerboard with 22 frets, FERNANDES original active F.G.I TECHNOLOGY pickups are mounted for low noise and very crisp single-coil sound.

The neck is thin and the fingerboard is relatively flat, making it suitable for technical playing.
There are some minor scratches and dings scattered throughout, and the white line is yellowed.
The truss rod is fully tightened, but there is no problem with the condition of the neck and it does not affect the playability of the instrument.
The neck has been cleaned and maintained at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problem for normal use.

Case: Genuine soft case
Weight: 3.70kg
Truss Rod: Neck is fine at the limit of the rod
Fret Level: No problem, fret height is sufficient.
String Height: 2.0mm above the 12th fret on the bass string side.
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.5mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 23.0mm
SCALE: 648mm (25.5")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Modification: PU selector (mini toggle SW) replaced
Repair/Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical replacement

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Case Genuine soft case

Weight 3.70kg

Truss rodThe neck is at the limit of the rod length.

No fret remainder problem, enough fret height

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 42.5mm

Neck thickness near 1st fret 21.5mm

Neck thickness near 12th fret 23.0mm

Scale 648mm (25.5")

RADIUS305mm (12")

Strings in setup ERNIE BALL 2223 / .009-.042 set

Modified partReplacement of PU selector (mini toggle SW)

Repair/Maintenance partCleaning, string change, rod adjustment, octave adjustment, string height adjustment, electrical replacement