USED Fender / Jimi Hendrix Stratocaster Olympic White [12]

Jimi Hendrix model is now in stock.
This Jimi Hendrix model was built at the Fender Ensenada Factory.
It features a reverse type large headstock that symbolizes a right-handed guitar that was converted to lefty specs, and a rear pickup that is slanted in the opposite direction of normal.

The bottom of the guitar is bouncy, and the top note has a tension that allows for emotional playing, and above all, the look of the guitar exudes a hot rock feeling.

The bridge pickup, which is reverse-slanted like the head, produces an edgy and aggressive sound.
It contributes greatly to the aggressive sound that can be said to be the true essence of Jimi's music.

The slightly flat 9.5" R fingerboard and medium jumbo frets are all-around specs, and the gray bobbin American Vintage 65 single-coil pickups give the guitar a delicate, singing tone.
There are some minor scratches and dings scattered throughout, and there are paint spots all over the body.
The truss rod has a little remaining in the direction of tightening, but the neck is currently in good condition.
The back panel is missing and there are some signs of use, but all parts have been maintained and cleaned at our repair center, so playability is good.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: MX18105697
Year of manufacture: 2018
Country of Manufacture: Mexico
Case: non-genuine soft case
Includes: Arm
Weight: 3.57kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right (not much left)
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.7mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 21.9mm
SCALE: 648mm (25.5")
RADIUS: 241mm (9.5")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number MX18105697

Year of manufacture 2018

Country of manufactureMexico

CaseNon-genuine soft case

AccessoriesArm

Weight3.57kg

Truss rod rod confirmed to 60 degrees left and right, no problem (not much left)

Fret height: The frets are high enough.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

Nut width 41.7mm

Neck thickness near the 1st fret: 21.4mm

Neck thickness near 12th fret: 21.9mm

SCALE 648mm (25.5")

RADIUS241mm (9.5")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment