USED Gibson USA / Les Paul Classic Bigsby Mini Hum 2017 Limited Ebony [12]

The 2017 Limited Edition Les Paul Classic is now in stock.
Based on the 2017 model of the Les Paul Classic, this model is equipped with a mini humbucker and comes standard with a Bigsby tremolo unit, and was released exclusively at certain music stores.

The 1960-style wood specs include a mahogany body with 9-hole weight relief that provides a good weight balance, a maple top, and a slim-tapered mahogany neck/rosewood fingerboard.

The pegs are equipped with Grover locking tuners as standard equipment, which also provides practicality in terms of tuning stability and speedy string changes.

The mini humbuckers provide a low-noise, crisp sound, and the Bigsby tremolo unit provides a nice vibrato.
There are scratches on the back of the body and the paint is dull.
There are many scratches and dents scattered throughout the instrument, and the hardware is dull.
Although it has some signs of use, it has been maintained and cleaned at our repair center and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 170022393
Year of manufacture: 2017
Country of manufacture: USA
Case: Original hard case
Weight: 4.91kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fret Height: No problem, fret height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.1mm
Neck thickness near 1st fret: 20.0mm
Neck thickness near 12th fret: 22.1mm
SCALE: 624mm (24.56")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* Please note that this is a used item and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 170022393

Year of manufacture2017

Country of manufactureUSA

CaseGenuine hard case

Weight 4.91kg

Truss rod no problemRod checked up to 60 degrees to the left and right, no problem

Fret remainderNo problemsAffordable fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.1mm

Neck thickness near 1st fret 20.0mm

Neck thickness 22.1mm near 12th fret

Scale 624mm (24.56")

RADIUS305mm (12")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment