USED Gibson Memphis / Shinichi Ubukata ES-355 VOS Vintage Ebony [12]

The Shinichi Ikuta ES-355, produced in a limited edition of 150 pieces in 2017, is now in stock!
Based on the ES-355 with Bigsby used by Shinichi Ikuta, known as the guitarist of ELLEGARDEN and Nothing's Carved In Stone, this is the 31st of 150 pieces of this signature model.

It features a jet-black Ebony color with Vintage Original Spec finish, chrome hardware, a dark rosewood fingerboard, and a body with diamond f-holes like the models used by Trini Lopez and Dave Grohl.

Mr. Lopez's trademark skull design is printed on the head back and outside of the hard case.

It has a maple/poplar/maple laminate body, mahogany neck/rosewood fingerboard with 22 frets, and two MHS humbuckers developed by Memphis Factory as pickups.
It has 2 volume/2 tone, a 3-way toggle switch with 6-way and baritone switch, and a wide variety of sound variations.

As this is a limited edition of 150 pieces worldwide, it is extremely rare and its price has skyrocketed along with its popularity.
This is a must-have item for fans, so please take advantage of this opportunity!
In addition to minor scratches and dull parts due to the VOS finish, there are also scratches on the buckle on the body back, a play mark from the 6th string side horn to the front pickup, paint chips on the lower part of the body back, and a chip on the top of the tone knob, all due to use.
The guitar has been maintained and cleaned at our repair center, and is in good playability condition.
Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 11317724
Year of manufacture: 2017
Country of manufacture: USA
Case: Original hard case
Accessories: Certificate of Authenticity
Weight: 4.19kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.6mm
Neck thickness near 12th fret: 26.4mm
SCALE: 628mm (24.75")
RADIUS: 305mm (12")
Strings in setup: GHS Shinichi Ubukata Signature Strings / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs of the item

Product rank B+: There are some scratches, but no problem in normal use.

Serial number 11317724

Year of manufacture 2017

Country of manufactureUnited States

Case Genuine hard case

AccessoriesCertificate of Approval

Weight4.19kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 43.0mm

Neck thickness 22.6mm near the 1st fret

Neck thickness near 12th fret: 26.4mm

Scale 628mm (24.75")

RADIUS305mm (12")

Strings for setup GHS Shinichi Ubukata Signature Strings / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment