USED EVH / Wolfgang WG Standard Baked Maple Fingerboard Royalty Purple [12]

This affordable model offers the unique styling and grand scale sound specified by Eddie Van Halen.
The basswood body has a special "comfort cut" for maximum playability and a stable fit.

The bolt-on jointed baked maple neck and graphite reinforced rod are resistant to temperature and humidity, and a convenient spoke wheel at the base of the neck allows for easy truss rod adjustment.

The back of the neck has an oil finish and rolled edge, 22 jumbo frets for comfortable playability and speed, and the 12"?16" compound radius baked maple makes it extremely easy to play in all positions.

Dual EVH(R) Wolfgang humbuckers mounted directly on the body deliver rich sustain that is true to the picking nuance.

The EVH-branded Floyd Rose special bridge and R2 locking nut keep the guitar consistently in tune even under heavy arming.
The matte finish paint shows minor scuffs and scratches, and there is some shine on the back of the body, but there are few signs of use.
The playability is also good as each part has been maintained and cleaned at our repair center.
Item Rank: B+: Some scratches, but no problem in normal use.

Serial Number: ICE2301880
Year of manufacture: 2023
Country of manufacture: Indonesia
Case: Original soft case
Accessories: Arm
Weight: 3.34kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 20.5mm
Neck thickness near 12th fret: 22.6mm
SCALE: 648mm (25.5")
RADIUS: 406mm (16")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* This is a used item and there are scratches, dents, etc. that are difficult to see in the photos or other than those listed. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number ICE2301880

Year of manufacture 2023

Country of manufactureIndonesia

CaseGenuine soft case

AccessoriesArm

Weight3.34kg

No truss rod problemNo problem when rod is checked up to 60 degrees to the left and right.

Fret RemainingNo problem, sufficient fret height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.0mm

Neck thickness near 1st fret 20.5mm

Neck thickness 22.6mm near 12th fret

SCALE 648mm (25.5")

RADIUS406mm (16")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment