USED Fender Japan / Stratocaster ST57-53 MOD 1993-1994 Tabacco Sunburst [12]

A mid-1990s Fender Japan Stratocaster with self-religid finish is in stock!
Based on the serial number and basswood body, it is believed to be an ST57-53 manufactured by Fujigen between 1994 and 1995.

The pickups are unknown, but they have been replaced with crosswire pickups and the mounting tubes have been replaced during maintenance due to deterioration.
The pegs have been replaced with GOTOH rotomatic type, and the bridge saddle has been replaced with genuine Fender parts.

All electrical parts have been replaced with CTS pots, and the lever switch has been replaced with an unknown maker.
The topcoat on the entire body has been sanded to remove the shine, and the paint has been partially removed.
The fingerboard surface and fingerboard sides also have some dark spots due to partial sanding and use.
There are also numerous dents scattered throughout the fretboard, and together with the self-relief, there is a strong sense of use.
There is a missing back panel and some parts have been replaced, but each part has been maintained and cleaned at our repair center, and playability is good.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: MIJ N031093
Year of manufacture: 1993-1994
Country of manufacture: Japan
Case: Genuine soft case
Accessories: Arm
Weight: 3.72kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL110 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, control cleaning, pickup mount tube replacement

* Please note that this is a used instrument and there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.