USED Washburn Washburn / Nuno Bettencourt Signature N4-SA Natural Matte [20]

The N4, Nuno Bettencourt's favorite machine, is a representative model of Washburn, a long-established brand founded in 1883.
Rare solid ash body model with few copies in circulation in the 90's, maple neck, ebony fingerboard wood material.
Natural matte finish with a wood texture.
The N4 features a reverse head and original Washburn pegs.
The bridge is equipped with a Schaller Floyd Rose unit with Washburn engraving. Seymour Duncan 59(F) and Bill Lawrence L-500(R) pickups are mounted.

* It has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, and mortised after our arrival, so it is in good playing condition.

The back panel is missing.
There are many buckle scratches on the body back, and other scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 1995
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine arm
Country of Origin ： USA
Weight ： 3.59kg
Serial ： 9509039

Truss Rod: No problem, confirmed to be 60 degrees to the left and right
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.3mm
Neck thickness(near 1st fret)|19.9mm
Neck thickness (near 12th fret)|23.1mm
SCALE|648mm (25.5")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
41.3mm

Neck Thickness (near 1st fret)
19.9mm

Neck Thickness (near 12th fret)
23.1mm

Scale
648mm (25.5")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing