USED Epiphone Epiphone / Les Paul Standard Plus Top Vintage Sunburst [20]

The most representative model of Gibson and Epiphone, the "Les Paul Standard" is a gorgeous "Plus Top" model with flame maple laminated on the top of the body.
The flamed maple top, mahogany neck, and rosewood fingerboard are set-in joints, and the "Les Paul" name, which can be called because it is a direct Gibson brand, is inherited not only by the name but also by the traditional specifications.
Rear pickup has been replaced with Seymour Duncan SH-4.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, string height adjusted, rubbed together, and end pins replaced, so it is in good playing condition.

There are dents with paint peeling on both sides of the body top, and there is a buckle scratch on the body back.
There are other scratches, dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 2006
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Soft case / Non-genuine
Weight ： 4.11kg
Serial ： EE06074017

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.4mm
Neck thickness(near 1st fret)|22.5mm
Neck thickness (near 12th fret)|24.8mm
SCALE|628mm (24.75")
RADIUS|406mm (16")
Strings for setup|D'Addario EXL110 / .010-.046 set
Repair and maintenance parts|cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, end pin replacement

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.4mm

Neck Thickness (near 1st fret)
22.5mm

Neck Thickness (near 12th fret)
24.8mm

Scale
628mm (24.75")

RADIUS
406mm (16")

Strings for setup
D'Addario EXL110 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, end pin replacement