USED Gretsch Gretsch / 6120 Chet Atkins Orange [20]

Gretsch's popular "6120" model with its striking orange color, widely known for its use by Brian Setzer and others.
Maple body, maple neck, and ebony fingerboard with block position markings.
The well-known Filtertron pickups, Bigsby unit, and roller bridge are included.
Controls are 3-way selector switch, master volume and volume of each pickup, and 1 tone.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenor adjustment, and electrical repair have been done.
The truss rod is fully tightened and the neck is slightly threaded and high pitched, so it has been adjusted by fret adjustment.
The low frets are particularly low due to the fret adjustment.

The pick guard is missing.
The gold parts have some spots and the plating is faded, and there are some minor scratches and small dents.

Item rank: B+ (Good)

Year of manufacture: 1993
Truss Rod ： Tightened
Fretboard: less than 50%.
Accessories ： Hard Case / Genuine
Country of Origin ： Japan
Weight ： 3.60kg
Serial ： 9312120-926

Truss rod is defective and the neck is warped at the rod limit (slightly twisted)
Fretboard is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.1mm
Neck thickness(near 1st fret)|20.2mm
Neck thickness(near 12th fret)|-
SCALE|624mm (24.56")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, electrical repair

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Defective, neck warped at rod limit (slightly twisted)

Fret Remaining
Defective, need to consider replacing at the next repair.

String height (bass string side)
2.0mm above the 12th fret

String height (treble string side)
1.5mm above the 12th fret

Nut width
43.1mm

Neck Thickness (near 1st fret)
20.2mm

Neck Thickness (near 12th fret)
-Neck Thickness (near 12th fret)

Scale
624mm (24.56")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, rubbing, electrical repair