USED Fender USA Fender / 50th Anniversary American Standard Stratocaster 2-Tone Sunburst [20]

Flame maple top and back, alder center body, maple neck, rosewood fingerboard, gold parts, this limited edition model was released to commemorate the 50th anniversary of the Strat's impressive debut in 1954.
While based on a traditional style, modern arrangements have been made in various areas.
The fretboard radius is 9.5", which is slightly flatter than the traditional fretboard, improving playability.

* After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and pickup mount rubber replacement (middle x 1, rear x 2) have been done, so it is in good playing condition.

There are some parts that have some chinks and minor rust, and overall there are some minor scratches, small dents, and other signs of use.

Item rank: B+ (Good)

Year of manufacture: Made in 1996
Truss rod: There is enough room.
Fret: 60-70%.
Accessories ： Hard case / Genuine tremolo arm, back panel parts
Country of Origin ： USA
Weight ： 3.44kg
Serial ： S0143 OF S2500

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|43.0mm
Neck thickness(near 1st fret)|20.5mm
Neck thickness (near 12th fret)|22.0mm
SCALE|648mm (25.5")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, pickup mount rubber replacement (middle x 1, rear x 2)

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but not necessarily in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut width
43.0mm

Neck Thickness (near 1st fret)
20.5mm

Neck Thickness (near 12th fret)
22.0mm

Scale
648mm (25.5")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, pickup mount rubber replacement (middle x 1, rear x 2)