USED Gibson USA Gibson / 1976 Thunderbird IV Bicentennial Edition Natural [20]

The Thunderbird Bicentennial was released to commemorate the bicentennial of the founding of the United States of America, and was produced in a limited edition in 1976.
The "76" is also specially engraved on the tricolor guard logo designed in the motif of the United States' national bird, the bald eagle, and the U.S. flag.
The wood specs of mahogany through neck and mahogany wing body are limited edition, and the natural color is rare for Thunderbird.

The neck is a little high and the frets have been adjusted by fret adjustment, and the frets are quite low.
When we received this guitar, the rear pickup had an output problem, so the pickup has been rewound.
Pickup fence and bridge cover are missing. There are holes where the pickup cover, finger rest, bridge cover, and strap pins were installed.
The strap pins have been moved to the back of the body, and there is wood chipping under the strap pins.
There are dents and cracks on the corners of both sides of the head.
There are numerous dents with dings, cracks, and chips on both sides of the body and on the corners and sides of the body, as well as dents all over both sides of the body.
There are some parts that have some rust and scratches, and the overall appearance of the guitar is a little bit rough.

After our arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment were performed.

Item rank: B+ (Good)

Year of manufacture: 1976
Truss rod : There is enough room.
Fretboard : Less than 50%.
Accessories ： Hard case / Genuine
Country of Origin ： USA
Weight ： 4.16kg
Serial ： 002455501

Truss rod: No problem, confirmed up to 60 degrees to the left and right.
Fret remainder is defective and needs to be replaced when it is repaired next time.
String height (bass string side)|3.0mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.4mm
Neck thickness(near 1st fret)|19.8mm
Neck thickness (near 12th fret)|23.4mm
SCALE|864mm (34")
RADIUS|254mm (10")
Strings for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem (slight high spring).

Fret remainder
Defective, need to consider replacing the frets at the next repair

String height (bass string side)
3.0mm above the 12th fret

String height (treble string side)
2.0mm above the 12th fret

Nut width
38.4mm

Neck Thickness (near 1st fret)
19.8mm

Neck Thickness (near 12th fret)
23.4mm

Scale
864mm (34")

RADIUS
254mm (10")

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing