USED Fender Custom Shop / Team Built Custom Michiya Haruhata Stratocaster III Caribbean Blue Trans [20]

The Team Built Custom Michiya Haruhata Stratocaster III is the third of the Michiya Haruhata signature models by Fender Custom Shop.
The body is made of ash back and quilted maple, and the neck is made of rose fingerboard.
The pickups are a Dimarzio Air Norton (ZEBRA) on the front, a Texas Special in the center, and a Dimarzio Fred (ZEBRA) in the rear, mounted directly on the body. The specification has been drawn out by Mr. Haruhata's obsession with the sound of the body.

There is a small ding on the top of the head with a chip in the clear paint, and a ding on the side of the body next to the pickguard with a crack in the paint.
There is a small ding with a dent near the back plate on the back of the body.
There are some parts that have some chinks and minor rust, and overall, there are some minor line scratches and small dents.

After arrival, cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and mortise adjustment

Item rank: B+ (Good)

Year of manufacture: 2010
Truss rod: There is enough room.
Fretboard : 60～70
Accessories ： Hard Case / Genuine Tremolo Arm, Certificate, Strap, Shield
Country of Origin ： USA
Weight ： 3.73kg
Serial ： R53387

Truss Rod : No problem, confirmed to 60 degrees left and right
Fret height: No problem, enough fret height.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.9mm
Neck thickness(near 1st fret)|21.9mm
Neck thickness (near 12th fret)|23.8mm
SCALE|648mm (25.5")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

Specs

No truss rod problem.

No fret remainder problem, enough fret height.

String height (bass string side) 2.0mm above 12th fret

String height (treble string side) 1.5mm above 12th fret

Nut width 42.9mm

Neck thickness(near 1st fret)21.9mm

Neck thickness (near 12th fret)23.8mm

Scale648mm (25.5")

RADIUS254mm (10")

Strings at setup ERNIE BALL 2223 / .009-.042 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment