Skip to product information
1 of 16

USED FENDER USA / American Vintage 70s Stratocaster with Rosewood Fingerboard, Natural Finish [20]

Serial Number : V01344

[SN V01344] USED FENDER USA / American Vintage 70s Stratocaster with Rosewood Fingerboard, Natural Finish [20]

Item Code: 20-2800005489668
Condition: USED
Store: [20] fukuoka

Regular price ¥247,200 JPY
Regular price Sale price ¥247,200 JPY
Sale Sold out
Shipping calculated at checkout.
If you would like to make a bank transfer, please give us an e-mail with name of your request item.
For customers residing in Japan
A U.S.-made Stratocaster that faithfully recreates the unique specifications emblematic of 1970s Fender guitars
Featuring a striking large headstock, a three-point neck plate engraved with an “F,” a bullet nut that can be easily adjusted from the headstock side, and the modern logo emblematic of the ’70s, this model faithfully recreates the era.
This model is also notable for its three-point joint plate and the Micro-Tilt system, which allows for adjustment of the neck angle.
This Stratocaster from the American Vintage Series remains highly popular even after production has ended, thanks to its exceptional quality.

It is in good condition, with only minor scratches and small dents.

Condition Grade: B+: Some minor scratches, but no issues for normal use

Serial Number: V01344
Country of Manufacture: USA
Case: Genuine hard case
Accessories: Arm and bridge covers
Weight: 3.93 kg
Truss Rod: No issues; rod movement tested up to 60 degrees in both directions with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String Action (Treble Side): 1.5 mm at the 12th fret
Nut width: 42.4 mm
Neck thickness near the 1st fret: 22.0 mm
Neck thickness near the 12th fret: 24.0 mm
Scale: 648 mm (25.5")
Radius: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, and leveling

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret life, string height, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the values will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.
1970年代のフェンダーを象徴する独特な仕様を再現したUSA製のストラトキャスター
存在感抜群の ラージヘッド に 「F」刻印の3点留めネックプレート、ヘッド側から容易に調整可能な ブレットナット 、70年代を象徴するモダンロゴなど当時を忠実に再現。
3点止めのジョイントプレートとネック角の調整が可能なマイクロティルトを採用しているのも特徴的なモデル。
生産完了後もその品質の高さから人気の高いアメリカン ヴィンテージシリーズのストラトキャスターです。

細かい擦り傷や小さな打痕程度で状態良好です。

商品ランク: B+:多少傷はあるが通常使用する用途において問題なし

シリアルナンバー: V01344
製造国: アメリカ
ケース: 純正ハードケース
付属品: アーム・ブリッジカバー
重量: 3.93kg
トラスロッド: 問題なしロッド左右60度まで確認済みにて問題なし
フレット残り: 正常範囲内演奏可能なレベルでフレット高さあり
弦高低音弦側: 12フレット上 2.0mm
弦高高音弦側: 12フレット上 1.5mm
ナット幅: 42.4mm
ネック厚1フレット付近: 22.0mm
ネック厚12フレット付近: 24.0mm
スケール: 648mm (25.5")
RADIUS: 184mm (7.25")
セットアップ時の弦: ERNIE BALL 2223 / .009-.042 set
リペア・メンテナンス箇所: クリーニング・弦交換・ロッド調整・オクターブ調整・弦高調整・すり合わせ

* 中古品につき、傷・打痕等、写真に写りにくい部分や記載以外の傷があります。予めご了承くださいませ。

* トラスロッド、フレット残り、弦高等の記載がある場合は当社スタッフがセットアップ時に計測したものであり、気候、湿度等、環境の違いによる影響等で、変化が起こります。
数値は購入時の参考としてご利用いただく事を想定しており、お手元に届いた際に同数値である事をお約束するものではございません。

* こちらの商品は現物1点限りを、店頭展示を含め複数のモールに同時掲載しております。売却に伴う商品情報の削除は迅速を心掛けておりますが、必ずしもリアルタイムではございません。
ご注文後に万一売り切れとなっておりました際は、誠に申し訳ございませんがご容赦くださいませ。
View full details

Please Note

The items name with "USED" are used items, and comes as shown in the pictures so there may be marks of use. All items were tested by our store staff and we test each item one more time before shipping them out to make sure they are fully functional.

All items for sale on ISHIBASHI MUSIC are stock currently available from all of ISHIBASHI stores around Japan. So it might take a few days for shipping.

And there is a chance that they may sell out in our retail location beforehand.

In that case we will cancel the order and refund any payments received.

Buyers are responsible for any and all duty and customs charges that may be incurred.These charges are are not included in the item price or shipping charges.

Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.

These charges are normally collected by the delivering courier company or when you pick the item up.

We are sorry, but we cannot alter the product price upon shipping nor can we call your purchase a gift.

If you want to know about tariff, please consult Customs.

Our business days are from Monday to Friday. We do not ship products on the weekends.

PACKING BOX SIZES

ABOUT US

Ishibashi Music Corporation is one of the largest and most respected Musical Instrument retail chain stores in Japan. The company is highly regarded world wide as a reliable seller of top quality USED and VINTAGE instruments.

Domestically the Ishibashi Music Corporation also handles a large amount of NEW inside of Japan. We have over 11 stores around Japan including Tokyo, Yokohama, Chiba, Nagoya, Osaka, and Fukuoka. Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from.

Please be patient while we do inter-company transfers on your items. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from 10:00am until 6:00pm (Tokyo time zone)

Sale

1 of 4