USED SEYMOUR DUNCAN / QUATTRO YQ-160 Black [20]

Yumi Acoustics, which served as a distributor for Seymour Duncan in the 1980s.
This is a QUATTRO YQ-160 from the Duncan logo era, commonly known as the “Yumi Duncan.”
With an alder body, maple neck, rosewood fingerboard, distinctive pickup layout and headstock shape, and a Floyd Rose bridge, this is a masterpiece crafted with specifications representative of the 1980s.
* Both pickups have been replaced; the front pickup has been swapped out for an unbranded vinyl-wound type, and the rear pickup has been replaced with a DiMarzio 151F Space.

The control back panel has been replaced, and the bridge back panel is missing.
There are numerous scratches on the back of the body that appear to be from dragging, as well as numerous areas where the paint on the body corners has been chipped and touched up with black paint.
Overall, there are numerous scratches, dents, and impact marks accompanied by cracked paint, giving the guitar a well-worn appearance.

Condition Grade: B: Shows significant scratches and signs of wear, but is suitable for normal use.

Serial Number: 00773
Case: Non-genuine soft case
Accessories: Arm
Weight: 3.31 kg
Truss Rod: Note: Tested up to 60 degrees to the left and right with no issues (limited adjustment remaining)
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low-string side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.6 mm
Neck thickness near the 1st fret: 20.4 mm
Neck thickness near the 12th fret: 21.1 mm
Scale: 648 mm (25.5")
Radius: 254 mm (10")
Strings at Setup: D'Addario EXL110 / .010-.046 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, electronics repair

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any specifications listed regarding the truss rod, remaining fret height, string action, etc., were measured by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be identical when the item arrives at your location.

* This is a one-of-a-kind item that is listed simultaneously on multiple marketplaces, including our in-store display. While we strive to promptly remove product listings upon sale, updates may not always be made in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.