USED Paul Reed Smith (PRS) Paul Reed Smith / S2 Custom 24 Fire Red Burst [20]

Manufactured at the PRS factory in Maryland, USA.
The PRS guitars are made at the PRS factory in Maryland, USA, maintaining the PRS quality and outstanding cost performance.
With its perfect body balance and wide variety of sounds, this is the next generation of PRS guitars for a variety of genres.
The neck shape is "Pattern Regular," which is neither too thin nor too thick, and offers excellent response in both chord and fingering. A coil tap is built into the tone pot, and a unique single tone that is not simply half power can be output by the pickups with special coil turns.

* After our arrival, it has been cleaned, string replaced, rod adjusted, octave adjusted, and string height adjusted, so it is in good playing condition.

The spec sheet is missing.
There are many small dents on the body with paint dents.
There are other minor scratches, small dents, and other signs of use.

Item rank : B+ (Good)

Year of manufacture: 2018
Truss Rod ： There is enough room
Fret: 60-70%.
Accessories ： Gig bag / Genuine arm
Country of Origin ： USA
Weight ： 3.42kg
Serial ： 18 S2031892

Truss Rod: No problem.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.4mm
Neck thickness(near 1st fret)|21.8mm
Neck thickness (near 12th fret)|23.8mm
SCALE|635mm (25")
RADIUS|254mm (10")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.4mm

Neck Thickness (near 1st fret)
21.8mm

Neck Thickness (near 12th fret)
23.8mm

Scale
635mm (25")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment