USED GUILD / F50 BL [03]

Guild Jumbo Model with Maple Archback!

Jumbo model with 17" wide body. The sides and maple are made of laminated maple, and the back features an arched structure. The G-shield inlay on the headstock and V-block inlay on the fingerboard are proudly displayed. It is heavy and has a powerful sound. The nut width is about 43mm, but the neck is thicker and wider toward the top, a design characteristic of guitars of yesteryear.

The neck was refretted by our repair department and the missing binding on the top of the bass string side of the head was repaired by our affiliated repair store. There is a repaired crack on the top of the edge of the pickguard (with a split stop inside), and the bridge pin and nut have been replaced. There are dents, scratches, weather checks, rust and tarnish on metal parts, cloudy/peeling paint and dirt, and the top of the sound hole rim on the pickguard side is worn from picking. The neck is tightly joined to the body, making it difficult to reset the neck or adjust the angle of the neck. The saddle and bridge have been set low since arrival, and the string height at the 12th fret is approximately 2.6mm on the 6th string side and 2.0mm on the 1st string side, ensuring a certain level of playability.
The neck is in good condition, and the truss rod has been confirmed to operate at 60 degrees left and right, but the left (loose) direction will be loose if it exceeds 60 degrees, and the left (tight) direction will be hard if it exceeds 60 degrees.
Both playability and sound are perfect.
An Active under-saddle pickup has been retrofitted, although the manufacturer is unknown. A non-genuine hard case is included. One latch bracket is missing, but it does not affect the practical use of the instrument.
This guitar stands out from the Guild lineup of the Westerly factory era, which was full of individualists.
It has a thick core sound with a lot of guts. It has a powerful sound. Recommended for those who are looking for a guitar that is different from others.
Top: Spruce
Side & Back: Maple
Neck：Maple
Fingerboard & Bridge: Ebony

Year of production: 1978
Accessories：Non-genuine hard case (damaged)
Serial: 175414
Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: 175414
Case: Hard Case
Weight: 2.995kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fret Residuals: No problem, as good as new
String height on bass side: 2.5mm above 12th fret
String height on high strings: 2.0mm above the 12th fret
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, angle adjustment with an iron, refretting, two PG side splice stoppers, nut replacement, binding correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
175414

Case
Hard case

Weight
2.995kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, same condition as new

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard correction, angle adjustment with an iron, refretting, two PG side splits, nut replacement, binding correction