USED FENDER JAPAN / ST57-TX 2-Tone Sunburst [03]

FENDER JAPAN ST57-TX is in stock used.
The arm is non-genuine.
Pot, PG, strap pin, back panel, and jack have been replaced.

The frets have been adjusted to match, so it is in good playing condition and ready to use.

There are some scratches and scuffs on the body, and the metal parts have some tarnishing and other signs of use.
We also offer a 1-year warranty to ensure that you can use the instrument for a long time after purchase.

Serial Number|Made in Japan N060989
Year of manufacture
Country of manufacture
Case|Non-genuine soft case
Accessories|Arm
Weight|3.42kg
Truss Rod|No problem, rod is set at 60 degrees to the left and right.
Fret remainder: No problem, enough fret height
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.6mm
Neck thickness(near 1st fret)|21.5mm
Neck thickness (near 12th fret)|24.1mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|10-46
Modified parts|-
Repair/Maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement, PG replacement, strap pin replacement, back panel replacement, jack replacement
Others|-
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Serial Number: Made in Japan N060989
Country of manufacture: Japan
Case: Soft Case
Accessories: Arm
Weight: 3.42kg
Truss Rod: No problem, rod is set at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.6mm
Neck thickness near 1st fret: 21.5mm
Neck thickness near 12th fret: 24.1mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: 10-46
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement, PG replacement, strap pin replacement, back panel replacement, jack replacement

* The truss rod, remaining frets, and string height, if indicated, were measured by our staff at the time of setup, and may vary due to climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
Made in Japan N060989

Country of manufacture
Made in Japan

Case
Soft case

Accessories
Arm

Weight
3.42kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.6mm

Neck thickness near 1st fret
21.5mm

Neck thickness near 12th fret
24.1mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings at setup
10-46

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement, PG replacement, strap pin replacement, back panel replacement, jack replacement