USED PAUL REED SMITH / 2004 Custom 22 10Top Whale Blue Wide Fat Neck [03]

Used "Custom 22 10Top" made in 2004 is in stock!

Custom 22
The Custom 22 is one of the PRS classic models with a richer and more musical sound than the Custom 24 due to the two fewer frets than the Custom 24, which makes the built-in PU position and other differences. This is one of the classic PRS models.

Body, neck, and fingerboard
The body is a royal combination of flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Indian rosewood.

Neck Shape
Wide Fat" neck shape is adopted. Neck shape has moderate thickness and good grip without feeling hard to play.

Pickups
A set of standard "Dragon II" pickups are installed. Alnico 4 magnets are used to give McCarty's vintage feel and easy-to-handle tone with power.

Selector etc.
The versatile sound produced by the 5-way rotary can be used with a wide variety of music genres. In particular, the coil-tap sound in the mix position is unique to this 5-way rotary specification.

Condition
There are some scratches and dents on the body back, as well as some paint chips on the top of the body, and a long scratch on the head.

The neck, frets, truss rod, etc. are all in good playing condition.
The neck, frets, truss rod, etc. are all in good playing condition, and have been fully adjusted and fretted at our repair center upon arrival.

Replacement parts
The tremolo bridge was severely deteriorated at the time of purchase, so we have replaced it with a genuine GEN II tremolo bridge (new).

Product rank: B: Fairly scratched and used, but no problem in normal use.
Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial number: 4 83153
Year of manufacture: 2004
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: arm, wrench, manual, tremolo bridge (original) * missing tag
Weight: 3.92kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.0mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.7mm
SCALE: 635mm (25")
RADIUS: 305mm (12")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, parts replacement (bridge)

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
4 83153

Year of manufacture
2004

Country of manufacture
USA

Case
Hard Case (Genuine)

Accessories
Arm, wrench, manual, tremolo bridge (original) * Tag missing

Weight
3.92kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.0mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
24.7mm

Scale
635mm (25")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, parts replacement (bridge)