USED FENDER USA / American Vintage 52 Telecaster LH [03]

FENDER USA American Vintage 52 Telecaster LH in used condition.
The frets have been fretted.
There are some minor dents on the sides, some paint peeling off, a little peeling on the head logo, scratches on the pickguard, and some parts have some signs of use, including scratches on the pickguard and some parts are dull.
The frets are low.

Serial number|-
Year of manufacture|-
Country of manufacture|- USA
Case|Hard Case
Accessories|Key, bridge plate, bridge cover, wrench, manual, tags
Weight|3.57kg
Truss Rod: No problem.
Fretboard is not in good condition and needs to be replaced when next time for repair.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.0mm
Neck thickness(near 1st fret)|23.0mm
Neck thickness (near 12th fret)|23.7mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2221 / .010-.046 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment
Other|-
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: U.S.A.
Case: Hard Case
Weight: 3.57kg
Truss Rod: No problem, rod checked 60 degrees to the left and right, no problem
Fret Residue: Defective, need to consider replacing next time for repair
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.0mm
Neck thickness near 1st fret: 23.0mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Country of manufacture
U.S.A.

Case
Hard case

Weight
3.57kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
Defective, need to consider replacement at next repair

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.0mm

Neck thickness near 1st fret
23.0mm

Neck thickness near 12th fret
23.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment