USED BURNS LONDON / Brian May Special Red [03]

BURNS LONDON Brian May Special is in stock used.
This model is believed to have been reissued in the 2000s. Made in Korea.

Comes with: original gig bag, arm, wrench, and one vibrato spring.

The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.

There are no noticeable scratches except for a very thin line on the top.
The strings have been replaced with new ones, and each part of the instrument has been cleaned, maintained, and set up by our repair department.
We also offer a 1-year warranty on this item so that you can use it for a long time after purchase.

Serial number|BHM2969
Year of manufacture|-
Country of manufacture|-
Case|Soft case
Accessories|Arm, wrench, 1 vibrato spring
Weight|3.58kg
Truss rod: One round on the tightening side is confirmed.
Fretboard: No problem, sufficient fretboard height
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|-
Neck thickness(near 1st fret)|-
Neck thickness(near 12th fret)|-
SCALE|-
RADIUS|-
Strings in setup|- ERNIE BALL 2223 / .009-.042 set
Modified parts|-
Repair/Maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, and rubbing
Other|-
Item Rank: B+: Some scratches, but no problem for normal use.

Serial Number: BHM2969
Case: Soft case
Weight: 3.58kg
Truss Rod: Tightened side confirmed to be one full turn.
Fretboard: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup, and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
BHM2969

Case
Soft case

Weight
3.58kg

Truss Rod
Checked to 1 round on the tightening side

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing