USED Paul Reed Smith (PRS) / 2014 P24 Trem Artist Package Blue Fade Pattern Regular Neck [03]

A used 2014 P24 Trem Artist Package with piezo pickups is in stock!
This is the so called "Artist Package" with artist grade maple top + Ebony veneer on the head and gold hardware.

Body, Neck and Fingerboard
Flame maple top, mahogany back, and mahogany neck. The fingerboard is made of Gabon Ebony.

Neck Shape
Pattren Regular" neck shape is used. It is moderately thick and has a grippy feeling.

Pickups
P22" pickups are installed.
This pickup is based on the 53/10, and is wound by the same wiring machine used for the pickups in the 50's. It is based on the single coil pickups installed on the Telecaster in the 1950's. It has a vintage tone, but also has a sound that is easy to match with modern music. The sound is characterized by its vintage tone, yet it is easy to match with modern music.

Selector etc.
The variety of sounds produced by the 5-way rotary can be used for a wide range of music genres. Especially, the coil tap sound in the mix position is only possible with the 5-way rotary.
The mini-switch switches between (1) magnet PU, (2) magnet PU + piezo PU mixed sound, and (3) piezo PU.

The PRS has been loved by guitarists of various genres for many years, and you will be able to feel the maximum performance in various fields such as live performances, sessions, and recordings.

Condition
Paint is cloudy from the neck joint to the cutaway. There are some other minor scratches and dings, and the guitar shows moderate signs of use.

The neck, frets, and truss rod are all in good playing condition.
The instrument has been fully adjusted and cleaned at our repair center when it arrived, so you can use it with no worries.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 14 214145
Year of manufacture: 2014
Country of manufacture: USA
Case: Hard Case (Genuine)
Accessories: Arm * Tag missing
Weight: 3.60kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 41.93mm
Neck thickness near 1st fret: 21.13mm
Neck thickness near 12th fret: 23.19mm
Scale: 635mm (25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard crack correction

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary depending on the climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B+: Some scratches, but no problem in normal use.

Serial number 14 214145

Year of manufacture 2014

Country of manufacture USA

CaseHard case (genuine)

AccessoriesArm * Tag missing

Weight 3.60kg

No truss rod problem, rod checked up to 60 degrees left and right, no problem.

Fret remainder no problem, enough fret height

String height 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 41.93mm

Neck thickness near the 1st fret: 21.13mm

Neck thickness near 12th fret 23.19mm

Scale 635mm (25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fingerboard crack correction