USED FENDER CUSTOM SHOP / Fender Custom Shop /American Classic Telecaster 2-Tone Sunburst [03]

1995 Fender Custom Shop/American Classic Telecaster 2-Tone Sunburst is now in stock!
* We have determined that it was made in 1995 based on the serial number and other specifications.

2-piece alder body with bird's eye maple neck and rosewood fingerboard.
The fingerboard radius is 9.5R and the neck shape is a thin C-shape, which makes it easy to play.
The back of the neck has been stripped of its paint afterwards, leaving it smooth as a satin finish.
The frets have been re-fretted and 22 narrow-tool type frets have been installed.
The fingerboard has been cut from the 22nd fret, but now the fingerboard has been extended to the 22nd fret like the original.

The 9.5R fingerboard and 22nd fret specs are not only for a modern spec model, but also a 6-piece hardtail bridge is used for high tuning accuracy.

The pickups are the original "Texas Special Strat" on the front and center, and "Texas Special Tele" on the rear.
Nashville Telecaster type 3 single coil pickups with 5-way switch specification are adopted.
In addition, a reverse control is used, which is the opposite direction of the normal Telecaster control.
In addition to the direct sound with a sense of power, this guitar has a beautiful and sparkling sound that is very attractive.

As for the condition, as mentioned above, there are some scratches, dents, and chipped paint all over the body, as well as fret re-do, fingerboard correction, and paint removal on the back of the neck.
There are also scratches, dents, and chipped paint all over the body, and some areas where the paint has been chipped on the edges of the body have been painted over with a pen.
There are also dents on the neck and head, and some parts are dull and dirty.
The guitar is in good playing condition, but there are no problems with playability.

This is one of the rare early Custom Shop models from the 90's. It is one of the few rare models on the market!
Please consider it as soon as possible, as it is one of the few rare models in the market!
Truss Rod: Tightening direction has room / Loosening direction has room
Neck condition: No problem
Fret: 80% remaining
Case：Non-genuine gig case
Accessories: None
Serial Number:CN401898
Weight: 3.50 kg

* Due to the nature of this item, we will not be able to show or move it to other Ishibashi Gakki stores. Please understand this in advance.
Please contact the Ochanomizu Main Store for further information.

Item Rank: B: Fairly scratched and used, but no problem in normal use.

Serial Number: CN401898
Year of manufacture: 1995
Case: Soft case
Weight: 3.50kg
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 1.6mm above 12th fret
String height on treble string side: 1.4mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial No.
CN401898

Year of manufacture
1995

Case
Soft Case

Weight
3.50kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees left and right

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
1.6mm above 12th fret

String height on treble string side
1.4mm above the 12th fret

Strings in setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment