USED Gibson Custom Shop / Historic Collection 1959 Les Paul Standard Reissue 2013 [03]

The Historic Collection is a series of reissues of famous historical instruments produced by Gibson Custom Shop.
This time, Gibson Custom Shop/Historic Collection 1959 Les Paul Standard Reissue 2013 has just arrived!

This Les Paul has a figured maple top, mahogany back body, mahogany neck, and rosewood fingerboard.
The neck shape is C-shape with moderate thickness, which is typical of 59 Les Paul.
The model is equipped with the same vintage tubeless truss rod and neck joint glued with nikawashi.

Two original "Custom Bucker" pickups are installed.
The warm and sweet tone of the Custom Bucker pickups, which are designed for the traditional "PAF" sound, is a perfect example of the vintage Les Paul sound.
You can enjoy any sound from clean sound to distorted sound!

The condition of the guitar has some minor dents, scratches, and scuffs.
There are some use feeling, but there are no noticeable scratches or dents.

This is a valuable Hiscolle 59 Les Paul with beautiful wood grain on the top!
Please take advantage of this opportunity!
Truss Rod: Slightly roomy in the tightening direction / roomy in the loosening direction
Neck Condition: No problem
Fret: 70-80%.
Case: Genuine hard case
Accessories: Certificate, manual, tags, toggle switch back panel
Serial number: 932416
Weight: 3.94 kg

Item rank: B+: Some scratches, but no problem in normal use

Serial number: 932416
Country of manufacture: USA
Case: Hard Case
Accessories: Manual, Certificate of Authenticity
Weight: 3.94kg
Truss Rod: No problem, rod is at 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is high enough.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 43.2mm
Neck thickness near 1st fret: 22.7mm
Neck thickness near 12th fret: 25.4mm
SCALE: 628mm (24.75")
RADIUS: 254mm (10")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* This is a used item and may have scratches, dents, etc. that are difficult to see in the photos or scratches not shown in the description. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the product is sold out after you place an order.

* Due to the nature of our products, we will not be able to guide you or move you to other stores within Ishibashi Gakki. Please understand this in advance.
Please contact us at the Ochanomizu Main Store if you have any questions.

Specs

Item Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
932416

Country of manufacture
United States of America

Case
Hard Case

Accessories
Manual, Certificate

Weight
3.94kg

Truss Rod
No problem, confirmed up to 60 degrees to the left and right of the rod

Remaining frets
No problem, sufficient fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
43.2mm

Neck thickness near 1st fret
22.7mm

Neck thickness near 12th fret
25.4mm

Scale
628mm (24.75")

RADIUS
254mm (10")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment