USED FENDER CUSTOM SHOP / Eric Clapton Stratocaster Journeyman Relic 2 Tone Sunburst [03]

The 2017 FenderCustomShop EricClapton Stratocaster Journeyman Relic 2Tone Sunburst is now in stock!

This is a rare Clapton model with Journeyman Relic on the ash body.

Lacquer coated "2-Piece Select Ash" body with "Journeyman Relic" finish.
Rift Sawn Maple neck.

The fingerboard radius is 9.5R.
Soft "V" neck shape is adopted.
The "Soft "V" neck shape is designed to be very comfortable for bends and vibrato, and it is finished with a V shape that seems to be absorbed by the hand.

The frets are "Vintage-Style" with 22 frets.

The tremolo block is fixed with a piece of wood in between.
The tremolo block is fixed with a piece of wood.

The pickups are "Vintage Noiseless Single-Coil Strat".
The pickups are equipped with "Vintage Noiseless Single-Coil Strat" pickups, which produce a clear sound with less noise.

The TBX tone control, which can also be used as a low cut, is a familiar feature of Clapton models, as well as a mid boost function that produces a strong, fat lead tone.

A wide range of tone control is available at your fingertips.

There are some picking scratches, buckle marks, and other scuffs and dings that may have been added later, but it is in good playing condition.

This is an Eric Clapton model with a rare ash body and Journeyman Relic.
This guitar is highly recommended not only for fans but also for those who are looking for a versatile Strat that is easy to use!

The finish of the relic is well done and has a great atmosphere, please take this opportunity to consider it!

* Due to the nature of this item, we are unable to move it between stores.
Truss rod: No problem, confirmed up to 60 degrees to the left and right of the rod.
Neck Condition:
Fret: approx. 70%.
Case: Genuine hard case
Accessories: Certificate, arm, bridge cover
Serial number: CZ531348
Weight: 3.33kg

Item rank: B: Fairly scratched & used, but no problem in normal use

Serial Number: CZ531348
Country of manufacture: USA
Case: Hard Case
Weight: 3.33kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right
Fretboard Height: No problem, fretboard is high enough.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.4mm
Neck thickness near 12th fret: 23.7mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* The truss rod, remaining frets, and string height are measured by our staff at the time of setup and may vary due to differences in climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs (Japanese only)

Product rank
B: Fairly scratched and used, but no problem in normal use.

12 months old

Serial number
CZ531348

Country of manufacture
U.S.A.

Case
Hard Case

Weight
3.33kg

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.1mm

Neck thickness near 1st fret
21.4mm

Neck thickness near 12th fret
23.7mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment