USED yamaha / sl450s [03]

Used YAMAHA SL450S in stock.
The frets are low.

The frets have been adjusted to match the fretboard, so it is in good playing condition and can be used without any problems.

There are some dents and scratches on the body, metal parts are dull, and plastic parts are yellowed.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: 306000
Case: Soft case
Accessories: wrench
Weight: 4.18 kg
Truss Rod: Note: Checked up to 60 degrees left and right, no problem (not much left)
Fret rest: Fret rest is defective and needs to be replaced at the time of next repair.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, neck ironing

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos.

* If the truss rod, fretboard rest, or string height is indicated, it was measured by our staff at the time of setup and may change due to the effects of climate, humidity, and other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product rank B: Fairly scratched and used, but no problem in normal use.

Serial number 306000

CaseSoft case

AccessoriesWrench

Weight4.18kg

Truss RodCaution: The truss rod has been checked up to 60 degrees to the left and right, and there is no problem.

Fret remainder is defective and needs to be considered for replacement at next repair.

String height: 2.0mm above the 12th fret on the bass string side

String height: 1.5mm above the 12th fret on the treble string side

ERNIE BALL 2221 / .010-.046 set strings at setup

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, neck ironing correction