USED FENDER CUSTOM SHOP / CUSTOM TELECASTER [03]

1996 Fender Custom Shop Custom Telecaster Shell Pink is now in stock!
* This is a 1996 Fender Custom Shop Custom Telecaster Shell Pink.

2-piece alder body with bird's eye maple neck and slabbed rosewood fingerboard.
The neck shape is a thin C-shape with a comfortable grip in the hand.
The fingerboard radius is 7.25R and 21 vintage type frets are installed.
The center pickup and the controls on the body have been counter-cut afterwards. Conductive paint is applied to the counterbore.

The body color is "Shell Pink". The body color is "Shell Pink", a slightly burnt color, which is different from the usual shell pink color.

Two black bobbin type pickups are installed. (Front PU: approx. 7.4k, Rear PU: approx. 6.5k)
The pickups and condensers have been replaced from the original ones, and there are signs of rewiring.
The controls also seem to have been modified, with a 4-way switch specification of Mix (series wiring)/Front PU/Mix (parallel wiring)/Rear PU, and 1Vol1Tone.
In addition to the usual front PU/mixed (parallel wiring)/rear PU switching, the ability to select mixed (series wiring) makes it possible to produce a sound similar to that of a humbucker.

There are some scratches and dents on the body.
Many parts such as pickups, bridge, neck joint plate, and switches have been changed. The screws have a mixture of positive and negative threads.
As mentioned above, the controls have been modified, and there are traces of conductive paint and counterboring.
Although there are many replacement and modification points, there are no problems in terms of playing.

This custom Telecaster has a lovely atmosphere with double binding.
Please consider it!
Truss rod: There is enough room for tightening/loosening.
Neck Condition: No problem
Fret: 70-80%.
Case: Non-authentic hard case
Accessories: None
Serial Number: No
Weight: 3.615 kg

* Due to the nature of this product, we are unable to move it between stores.
Item Rank: B: Fairly scratched and used, but no problems in normal use.

Country of manufacture: U.S.A.
Case: Soft case
Weight: 3.62kg
Truss Rod: No problem, rod is fine, checked up to 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.1mm
Neck thickness near 1st fret: 21.1mm
Neck thickness near 12th fret: 24.6mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment, fret adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly, there are scratches & feeling of use, but no problem in normal use

Country of manufacture: U.S.A.

CaseSoft case

Weight3.62kg

No truss rod problem.

Fretboard: No fretboard height problem, enough fretboard height

String height: 2.0mm above the 12th fret on the bass string side

String height 1.5mm above the 12th fret on the treble string side

Nut width 42.1mm

Neck thickness near the 1st fret: 21.1mm

Neck thickness near 12th fret 24.6mm

Scale 648mm (25.5")

RADIUS184mm (7.25")

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment