USED FENDER JAPAN / JB-STD Vintage White [03]

FENDER JAPAN JB-STD is in stock used.
The body has scratches, large dents on the bottom, dull parts, dents on the contours of the back, and some signs of use including line scratches on the top, but this item has been cleaned, maintained, and set up by our repair department.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: JD13017729
Case: Soft case
Weight: 3.89kg
Truss Rod: Rod checked up to 60 degrees left and right
Fretboard: No problem, fretboard height is sufficient.
String height on bass side: 3.0mm above 12th fret
String height on treble string side: 2.4mm above 12th fret
Nut width: 38.3mm
Neck thickness near 1st fret: 20.9mm
Neck thickness near 12th fret: 24.5mm
SCALE: 864mm (34")
RADIUS: 184mm (7.25")
Strings in setup: D'Addario EXL165 / .045-.105 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret shaping, fret edge treatment

* Please note that there are scratches, dents, etc. that are difficult to see in the photos or that are not shown in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If the truss rod, remaining fretboard, or string height is indicated, it was measured by our staff at the time of setup, and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number JD13017729

CaseSoft case

Weight 3.89kg

Truss rod rod confirmed up to 60 degrees left and right

Fret remainder no problem, sufficient fret height

String height: 3.0mm above the 12th fret on the bass string side

String height: 2.4mm above the 12th fret on the treble string side

Nut width 38.3mm

Neck thickness near the 1st fret: 20.9mm

Neck thickness near 12th fret 24.5mm

Scale 864mm (34")

RADIUS184mm (7.25")

Strings D'Addario EXL165 / .045-.105 set at setup

Repair and maintenance parts cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret shaping, fret edge treatment