USED GRECO / EG600GS [03]

GRECO/EG600GS is now in stock in used condition!
The frets have been adjusted to match, so it is in good playing condition and can be used without any problems.

There are scratches, dents, and buckle marks on the body.
There are paint chips on the top end of the body, near the tailpiece, and near the pickups, as well as some scratches and marks on the back of the head.
This item has been cleaned, maintained, and set up by our repair department.

Item Rank: B: Fairly scratched and used, but no problem for normal use.

Serial Number: I786798
Case: Hard Case
Weight: 3.98kg
Truss Rod: 30° remaining on the tightening side
Fretboard: Still good for cutting, but the frets are low.
String Height Low String Side: 2.0mm above 12th fret
String height on treble string side: 1.7mm above the 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, matching, volume pot replacement, selector switch replacement, rod cover screw holes filled in

* There are some scratches, dents, etc. that are difficult to see in the photos or that are not listed in the description. Please understand that there are scratches, dents, etc. that are difficult to see in the photos or that are not listed.

* If there are descriptions of truss rod, remaining frets, or string height, they were measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank B: Fairly scratched and used, but no problem in normal use.

Serial number I786798

Case Hard Case

Weight 3.98kg

Truss rod has approx. 30° remaining on the tightening side.

Fret remainder note that it still stands up to cutting, but the frets are low.

String height: 2.0mm above the 12th fret on the bass string side

String height 1.7mm above the 12th fret on the treble string side

Strings at setup ERNIE BALL 2221 / .010-.046 set

Repair and maintenance partsCleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment, volume pot replacement, selector switch replacement, rod cover screw holes filled in