USED FENDER / 1975 Stratocaster Black [03]

The Stratocaster, which has been in production since 1954, has been loved by many players for decades.

The model we’ve just received is a 1975 Stratocaster featuring specifications different from those of the ’50s and ’60s, such as a large headstock, a truss rod accessible from the headstock via a bullet nut, and a three-point neck joint.

The body is believed to be ash based on the grain visible in the pocket, and this is a truly captivating instrument with a cool black finish!

The neck is made of one-piece maple, and the date stamp (09035054) indicates it was manufactured in 1975.

It is equipped with three pickups featuring flat pole pieces and gray bobbins, which appear to be original.
The front pickup is from 1975; the center pickup is illegible; and the rear pickup is faded and hard to read, but is believed to be from 1974.
It has a crisp, clean tone that’s perfect for cutting through the mix, and when distorted, it delivers a trebly, punchy rock sound.

The three pots, 5-way selector switch, tuners (with some holes filled), frets, and nut have been replaced.
The fingerboard has been leveled and refinished, and the back of the neck has been relacquered.

Overall, there are signs of use such as scratches, dents, and paint chipping, but considering its age, it is in good condition.

Thanks to the replacement of the frets and nut, it plays very well.

This Stratocaster features excellent pedal response and a sparkling sound, offering a charm unique to this era.
Please consider taking advantage of this opportunity.

* We sincerely apologize, but we are unable to accommodate requests to view this item at other Ishibashi Music locations or to have it moved to another store.
Please direct all inquiries to the Ishibashi Music Ochanomizu Main Store.
Truss Rod: Checked up to 60 degrees in both directions; no issues
Neck condition: No issues
Frets: About 80%
Case: Original hard case (shows significant wear, including peeling Tolex; cushioning missing from the bottom of the case interior)
Accessories: None
Serial Number: 584400
Weight: 4.125 kg

Condition: B: Shows significant wear and tear, but is in good working order for normal use

Serial Number: 584400
Country of Manufacture: USA
Case: Hard Case
Truss Rod: No issues; checked up to 60 degrees left and right with no problems
Fret Wear: Within normal range; fret height is sufficient for playing
String height (low string side): 2.0 mm at the 12th fret
String height (treble side): 1.5 mm at the 12th fret
Nut width: 41.1 mm
Neck thickness near the 1st fret: 21.5 mm
Neck thickness near the 12th fret: 23.4 mm
Scale: 648mm (25.5")
Radius: 184mm (7.25")
Strings at setup: ERNIE BALL 2223 / .009-.042 set
Repairs and Maintenance: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fingerboard repair, refretting, nut replacement

* As this is a used item, there may be scratches, dents, and other imperfections that are not visible in the photos or not listed here. Please be aware of this in advance.

* Any measurements listed for the truss rod, remaining fret life, or string height were taken by our staff during setup. These values are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be the same when the item arrives at your location.

* This item is a one-of-a-kind product currently listed simultaneously on multiple marketplaces, including our in-store display. We strive to promptly remove product listings upon sale, but updates may not always be in real time.
We sincerely apologize if the item happens to be sold out after you place your order, and we ask for your understanding.