USED FENDER USA / American Vintage '62 Stratocaster Thin Lacquer Olympic White [03]

FENDER USA / American Vintage ’62 Stratocaster Now in Stock (Used)!
This vintage reissue model faithfully reproduces the 1962 Stratocaster.
It features an alder body paired with a maple neck and rosewood fingerboard, and is equipped with three vintage-style single-coil pickups.
With a 7.25-inch radius fingerboard, a vintage-style 6-point tremolo, and Kluson-style tuners, this model is meticulously crafted to match early ’60s specifications down to the finest details.
Its appeal lies in the wide range of sounds characteristic of a ’60s Stratocaster—from clear tones with quick attack to sweet, mellow half-tones.
Combined with its classic Olympic White finish, this is a guitar that lets you fully enjoy that vintage feel!

There are signs of general wear throughout.
Scratches and dents are visible in various places on the top and back of the body, and there is a buckle mark on the back of the body.
There are sticker marks on the back of the headstock.
Additionally, there are signs that the side of the neck pocket was filed down for adjustment, and the finish is partially chipped around the joint and near the neck plate.
There is one shim in the neck pocket, but it is likely an original factory part.
It’s in good playing condition!

After this item arrived at our store, we replaced the strings with new ones and our repair department cleaned, maintained, and set up all parts.

Condition Grade: B: Shows significant scratches and signs of wear, but is in good working order for normal use

Serial Number: V170638
Year of Manufacture: 2007
Country of Manufacture: United States
Case: Original hard case
Accessories: Arm wrench
Weight: 3.52 kg
Truss Rod: No issues; checked up to 60 degrees to the left and right with no problems
Remaining Fret Life: Within normal range; fret height is sufficient for playing
String Height (Low String Side): 2.0 mm at the 12th fret
String action (treble side): 1.5 mm at the 12th fret
Nut width: 42.2 mm
Neck thickness near the 1st fret: 20.8 mm
Neck thickness near the 12th fret: 23.0 mm
Scale: 648 mm (25.5")
RADIUS: 184 mm (7.25")
Strings at Setup: ERNIE BALL 2221 / .010-.046 set
Repairs and Maintenance Performed: Cleaning, string replacement, truss rod adjustment, octave adjustment, action adjustment, fret leveling, shim adjustment, replacement of rubber pads for pickup height adjustment

* As this is a used item, there may be scratches, dents, and other imperfections that are not clearly visible in the photos or not listed here. Please be aware of this in advance.

* Any listed measurements for the truss rod, remaining fret height, string action, etc., were taken by our staff during setup and are subject to change due to environmental factors such as climate and humidity.
These measurements are intended as a reference at the time of purchase; we cannot guarantee that the measurements will be exactly the same when the item arrives at your location.

* This item is a one-of-a-kind product, and we list it simultaneously on multiple online marketplaces, including our in-store display. We strive to promptly remove product listings once an item is sold, but updates may not always be in real time.
We sincerely apologize in the unlikely event that the item is sold out after you place your order, and we ask for your understanding.