USED GRECO / EG900 SB [05]

Greco EG900 made in 1979 is now in stock.

This is one of the most popular Japanese vintage guitars due to its high degree of perfection.
EG900 has plain maple top and mahogany back.
Neck is made of maple. Fingerboard is rosewood with 70s LP spec.

Dimarzio PAF pickups are standard.
While most Greco guitars use original pickups, this EG900 is equipped with Dimarzio pickups, which shows that Greco was putting a lot of effort into this model at the time.

The front is original, but the rear may have been changed.
The overall condition of this model is not original due to the overall feeling of use and the color of the solder.
The model name is not stamped on the instrument, so it is a very old Dimarzio instrument.

The guitar has been checked and adjusted by a professional repair person after arrival, and is in good playing condition.

* The neck is not adjustable in the forward direction due to the truss rod being fully tightened.

Serial number: C795293
Year of manufacture: 1979
Country of manufacture: Japan
Case: Soft case
Weight: 4.29kg
Truss Rod: At the limit of the rod with a note of caution, the neck is currently in good condition.
Fret Depth: No problem, sufficient fret height.
String Height Bass String Side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Strings in setup: ERNIE BALL 2221 / .010-.046 set
Repair and maintenance parts: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing, mortise and groove adjustment, nut groove correction, saddle groove correction, pickguard correction, escutcheon (front) replacement, removal of sticking screws, doweling (pickguard side screws), and removal of burrs

Specs

Serial No.
C795293

Year of manufacture
1979

Country of manufacture
Japan

Case
Soft case

Weight
4.29kg

Truss Rod
Note: Neck currently in good condition at rod limit

Fret Remaining
No problem, sufficient fret height

String Height Low String Side
2.0mm above the 12th fret

String height on treble string side
1.5mm above the 12th fret

Strings in setup
ERNIE BALL 2221 / .010-.046 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, ironing, mortise and tenon, nut groove correction, saddle groove correction, pickguard correction, escutcheon (front) replacement, removal of sticking screws, doweling (pickguard side screws), removal of burrs