USED FENDER MADE IN JAPAN / Japan Exclusive Series Classic 50s Stratocaster [05]

One of the traditional Made in Japan Fender series is now in stock in used condition.
The Fender Japan Exclusive Series is a new lineup of made in Japan guitars that replaces the Fender Japan brand, which was discontinued in April 2015 due to a change in distributors. Convincing quality that only made in Japan can provide.
This model faithfully reproduces 50's features such as an alder body and 21F one-piece maple neck.
The rosewood fretboard is different from the 60's Strat, which is another standard model, and has an edgy mid-high range and a quick reaction when the attack is strong.

Although there are a few scratches due to use and aging, the guitar has been maintained by a professional department since its arrival.
The condition of playing is good after maintenance by a specialized department.
* The arm is missing.

Please correct the serial number ◯JD16010030

Serial number: JD14018325
Country of manufacture: Japan
Case: Semi-hard case
Accessories: None * Arm is missing
Weight: 3.47kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String height on bass side: 2.0mm above 12th fret
String height on treble string side: 1.5mm above 12th fret
Nut width: 42.7mm
Neck thickness near 1st fret: 22.3mm
Neck thickness near 12th fret: 24.5mm
SCALE: 648mm (25.5")
RADIUS: 184mm (7.25")
Strings in setup: ERNIE BALL 2223 / .009-.042 set
Repair and Maintenance: Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement
Other: Arm missing

specs

Serial No.
JD14018325

Country of manufacture
Japan

Case
Semi-hard case

Accessories
None* Missing arm

Weight
3.47kg

Truss Rod
No problem, rod checked up to 60 degrees to the left and right

Rest of frets
No problem, there is enough fret height

String Height Low String Side
2.0mm above 12th fret

String height on treble string side
1.5mm above the 12th fret

Nut width
42.7mm

Neck thickness near 1st fret
22.3mm

Neck thickness near 12th fret
24.5mm

Scale
648mm (25.5")

RADIUS
184mm (7.25")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, fret adjustment, pot replacement

Other repairs
Missing arm