USED TAKAMINE / DMP500CM-DC N [05]

The 2014 Musical Instrument Fair Limited Edition is now in stock.

This is an all mahogany model, with Honduran mahogany used for the top, sides, back, and neck.
This is Takamine's familiar combination of solid top and back and plywood sides, and the specs are designed to provide ample raw sound, but also to be easy to handle on stage.
The CT4-DX preamp is equipped with a wide-range, powerful-sounding piezo pickup driven by two 9V x 18V drives, and the built-in contact pickup allows you to enjoy percussion playing, etc. The CT4-DX is equipped with a 9V x 2 18V drive, and the CT4-DX is also equipped with a 9V x 2 18V drive.
The top, sides, and back of the body have minor scratches, dents, and other signs of use.
There is a 1cm ding on the top of the 6th string side of the body, and other wide dings.
There are some minor buckle scratches on the back and some rice grain sized dents on the sides.
Overall, there is a sense of use, but because it is a natural color, it is not so noticeable, so we can fully recommend this item.
The overall condition of the instrument has been adjusted by our professional repair staff since its arrival, and is in good playing condition.

Item Rank: B+: Some scratches, but no problem in normal use.

Serial number: 52090154
Year of manufacture: 2014
Country of manufacture: Japan
Case: Hard Case
Truss Rod: No problem, rod is checked up to 60 degrees to the left and right, no problem
Fret Depth: Still good for cutting but low frets.
String Height Low String Side: 2.5mm above 12th fret
High string on treble side: 2.0mm above the 12th fret
Strings in setup: Galli Strings / .012-.054 set
Repair and maintenance: Cleaning, string replacement, rod adjustment, and alignment

Specs

Item Rank
B+: Some scratches, but no problem for normal use

12 months old

Serial No.
52090154

Year of manufacture
2014

Country of manufacture
Japan

Case
Hard Case

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right

Fret Remaining
Note that the frets are low and can still withstand cutting.

String Height Low String Side
2.5mm above 12th fret

High string on treble string side
2.0mm above the 12th fret

Strings for setup
Galli Strings / .012-.054 set

Repair and Maintenance
Cleaning, string replacement, rod adjustment, and alignment